 |
 |
 |
 |
 |
 |
 |
 |
|
|
|
Kit Solutions > Buy a Kit > Buy a One-Wire Kit 
Buy a One-Wire Kit: The basic kit (three lengths): The basic kits below are designed to place a single baited and charged polywire at a height of 3 feet above the ground on fences running up to 330, 660, or 1320 feet. The supplies included in each basic kit can handle up to 4 corners, ends, or sharp turns. Detailed setup instructions are included. Chargers and gates are not included. To buy a charger compatible with your basic kit, select an AC-, battery-, or solar-powered charger from the second table. To complete your kit, purchase one or more gates from the third table. To see the parts included in this kit, click on Parts List. To view a detailed schematic drawing of the kit, click on Drawing. To further customize a single-wire kit or to plan an electric fence modeled on this kit, go to the Parts List and follow the instructions at the bottom of the table. Purchase basic kit here: Choose your charger: Select the charger for your kit from the table below. To use an AC-powered charger, your fence (the nearest part) will need to be less than 50 feet from the closest AC outlet. If this distance is over 50 feet but less than 500 feet, you can still use an AC-powered charger by purchasing additional insulated undergate and hookup wire. (Please note that you cannot use an ordinary outdoor extension cord to connect an AC-powered charger to your fence.) Add One or More Gates: Decide the number of gates your fence will need and enter this number in the "QTY" box of the table below. |